Skip to content
Bates NumberingA BATESFAST FIELD GUIDE
The workflowField notesQuestions
Open BatesFast
Bates Numbering / FIELD NOTES
Reference

Bates Numbering Examples: Prefixes, Ranges and Citations

A typical Bates number is a short prefix followed by a zero-padded sequence, such as ABC000001. A range names the first and last page: ABC000001–ABC000250 covers 250 pages, because 250 − 1 + 1 = 250. Each producing party gets its own prefix, and later volumes continue the count rather than restarting. Bates is capitalized because it is a proper noun, from Edwin G. Bates, whose numbering machine gave the practice its name.
Organized legal document sets with colored dividers and page-identifier areas.
Workflow illustrationBates Numbering

The rules for a Bates scheme are short; applying them is where people slip. This page works through concrete examples, from a single label to a multi-party, multi-volume production, and shows the arithmetic behind each range. For the reasoning behind prefix and padding choices, see Bates numbering format best practices; for the background, see what Bates numbering is.

What does a Bates number look like?

Every example below has the same two required parts: a fixed prefix and a sequence number padded with leading zeros to a fixed width. A separator and a suffix are optional and only appear if the agreed format includes them.

ExamplePrefixDigitsComment
ABC000001ABC6The most common shape: no separator, six digits
ABC-000001ABC-6Same sequence with a hyphen for readability
SMITH_0000001SMITH_7Wider padding for a matter expected to pass 999,999 pages
DEF00012345DEF8Eight digits; page 12,345 of the DEF series
ACME000123-CONFACME6Suffix only if the protocol requires it; designations usually travel separately

Padding width sets the ceiling. Six digits hold 999,999 pages; seven hold 9,999,999. The width also keeps text sorting correct: ABC000010 sorts after ABC000002, while unpadded ABC10 sorts before ABC2.

Bates range examples with the arithmetic

A range is written as its first and last identifier. The page count is the last number minus the first number plus one. Forgetting the plus one is the classic off-by-one error, and it shows up as two documents sharing a boundary number.

Take a 250-page first production split across three documents:

DocumentPagesBeginEnd
Engagement letter12ABC000001ABC000012
Email export230ABC000013ABC000242
Board minutes8ABC000243ABC000250

Check it: 12 + 230 + 8 = 250, and 250 − 1 + 1 = 250. Each document begins one number after the previous one ends (12 then 13, 242 then 243). A supplemental volume of 1,180 pages then starts at ABC000251 and ends at ABC001430, because 251 + 1,180 − 1 = 1,430. It does not start again at ABC000001.

Multi-party and multi-volume numbering schemes

When more than one party produces, each needs a prefix no one else uses, agreed before the first volume. Volumes are a delivery unit, so the cleanest schemes keep the volume name separate from the page identifier.

SituationExample schemeWhy it works
Plaintiff and defendantPLTF000001… / DEF000001…Both can start at 1 without colliding
Two co-defendantsACME000001… / BOLT000001…A role prefix such as DEF would be shared, so use party names
Third-party subpoena responseNORTHBANK000001…The producing non-party is identifiable from the label alone
Rolling volumes, one partyACME_VOL001 = ACME000001–ACME000250; ACME_VOL002 = ACME000251–ACME001430Volume names the delivery; the page sequence never restarts
Volume built into the prefixACME01-000001, ACME02-000001Workable only if agreed, since every citation must carry the volume code

Pages received from another party keep their original numbers. If you later re-produce them, the agreed approach decides whether they also get your prefix; do not stamp over someone else's identifiers without that agreement. How these ranges appear in load files and review platforms is covered in the e-discovery guide.

How do you cite a Bates range in a brief?

Cite exactly what is stamped, and pick one range style for the whole filing. Common forms:

  • Single page: ACME000214
  • Full range: ACME000214–ACME000219
  • Shortened range: ACME000214–19, where the ending repeats only the digits that change
  • With an exhibit: Ex. 12 at ACME000214–19
  • Non-consecutive pages: ACME000214, ACME000230–31

Shortened ranges get ambiguous when the format already contains hyphens. "ACME-000214-19" could be read as a page with a suffix, so with hyphenated identifiers write the full ending or use "through". Courts vary in what they want for filed exhibits: some local rules or standing orders ask for the court's own docket page numbers or exhibit page numbers alongside or instead of Bates numbers, so check the rules for your court before finalizing citations. The difference between these references is set out in Bates numbers vs page numbers.

Is "Bates" capitalized?

Yes. Bates is a proper noun: the practice is named after Edwin G. Bates, a New York inventor whose automatic numbering machine, patented in the early 1890s, was sold by the Bates Manufacturing Company. Write it the way you would write any eponym in legal prose:

  • Bates number, Bates range, Bates numbering
  • Bates-stamped production (hyphenated when it comes before a noun)
  • the documents were Bates stamped (no hyphen after the noun, in most style guides)

Lowercase "bates" turns up in emails and some software labels, but it reads as an error in a filing. Field names such as BEGBATES and ENDBATES are a separate convention and stay in capitals because they are database fields.

Bates numbering best practices: mistakes to avoid

  1. Under-padding. Starting at four digits caps the series at 9,999 pages. A 12,000-page production then needs a format change mid-case. Choose six or more from the start.
  2. Look-alike characters. A prefix ending in the letter O or I, such as ABCO, sits next to digits that look the same: ABCO00001. Avoid O, I and L at the end of a prefix.
  3. Restarting each volume. Volume two beginning at ABC000001 creates two pages with the same citation. Continue from the last number used.
  4. Changing the separator or case. ABC-000001 and abc000002 in the same matter break exact-match searches and look like different series.
  5. Mixing range styles in one brief. Pick full or shortened ranges and keep to it.
  6. Building a changeable label into the number. A confidentiality tier can be downgraded; the identifier cannot change. Keep them apart where possible, as explained in confidentiality designations alongside Bates identifiers.

Once the scheme is written down, BatesFast applies the prefix, padding and continuous count across the file set. For the mechanics of carrying one range across many PDFs, see batch Bates numbering across multiple PDFs, and for more planning references start at the Bates numbering reference home page.

Common questions

What is a Bates number, in one sentence?

It is a unique identifier, usually a party prefix plus a zero-padded number such as ABC000001, stamped on one page of a document production so that page can be cited and found without ambiguity.

How many pages are in the range ABC000101–ABC000175?

Seventy-five. Subtract the first number from the last and add one: 175 − 101 + 1 = 75. Without the added one you would count 74 and misplace the next document's starting number.

Should Bates numbers start at 1 or 0?

Start a first production at 1, displayed with padding as ABC000001. A number of all zeros is rarely used and can confuse page-count arithmetic. Later productions start at the next unused number.

Can two parties use the same Bates prefix?

They should not. Two parties stamping ABC000014 on different pages produce one citation that points at two documents. Agree distinct prefixes, ideally party names rather than shared roles, before the first production.

Is it Bates stamp or Bates label?

Both are used. Stamp comes from the mechanical machine; label and endorsement are common in ESI protocols. The identifier itself is the Bates number, and all forms keep Bates capitalized.

BEFORE YOU CHOOSE

Does BatesFast fit this job?

Apply a defined prefix and continuous sequence after the production specification and document order are agreed.

What to verify

Complete redaction separately. Reconcile the first and last identifier of each file with the index; stamping does not validate the legal production.

Plan the identifier format →

Account and export terms

Google sign-in is required. One complete production is free, with downloads available for seven days. Further productions require a paid per-device license. Check the current BatesFast price, offer and refund terms before purchase.

View current BatesFast plans →

This is a product-operated field guide in the PDFImpose network. Confirm the exported result and current terms before paying.